Examples¶
Let’s dive right in to some example code.
(A runnable notebook version of this examples page is included in the notebooks
subdirectory of the
poppy
source, or is available from here.)
For all of the following examples, you will have more informative text output when running the code if you first enable Python’s logging mechanism to display log messages to screen:
import logging
logging.basicConfig(level=logging.DEBUG)
- A simple circular pupil
- A complex segmented pupil
- Multiple defocused PSFs
- Band Limited Coronagraph with Off-Axis Source
- FQPM coronagraph
- FQPM on an Obscured Aperture (demonstrates compound optics)
- Semi-analytic Coronagraph Calculations
- Shifting and rotating optics
- Adjusting Display of Intermediate Wavefronts
A simple circular pupil¶
This is very simple, as it should be:
osys = poppy.OpticalSystem()
osys.add_pupil( poppy.CircularAperture(radius=3)) # pupil radius in meters
osys.add_detector(pixelscale=0.010, fov_arcsec=5.0) # image plane coordinates in arcseconds
psf = osys.calc_psf(2e-6) # wavelength in microns
poppy.display_psf(psf, title='The Airy Function')
A complex segmented pupil¶
By combining multiple analytic optics together it is possible to create quite complex pupils:
ap = poppy.MultiHexagonAperture(rings=3, flattoflat=2) # 3 rings of 2 m segments yields 14.1 m circumscribed diameter
sec = poppy.SecondaryObscuration(secondary_radius=1.5, n_supports=4, support_width=0.1) # secondary with spiders
atlast = poppy.CompoundAnalyticOptic( opticslist=[ap, sec], name='Mock ATLAST') # combine into one optic
atlast.display(npix=1024, colorbar_orientation='vertical')
And here’s the PSF:
osys = poppy.OpticalSystem()
osys.add_pupil(atlast)
osys.add_detector(pixelscale=0.010, fov_arcsec=2.0)
psf = osys.calc_psf(1e-6)
poppy.display_psf(psf, title="Mock ATLAST PSF")
Multiple defocused PSFs¶
Defocus can be added using a lens:
wavelen=1e-6
nsteps = 4
psfs = []
for nwaves in range(nsteps):
osys = poppy.OpticalSystem("test", oversample=2)
osys.add_pupil( poppy.CircularAperture(radius=3)) # pupil radius in meters
osys.add_pupil( poppy.ThinLens(nwaves=nwaves, reference_wavelength=wavelen, radius=3))
osys.add_detector(pixelscale=0.01, fov_arcsec=4.0)
psf = osys.calc_psf(wavelength=wavelen)
psfs.append(psf)
plt.subplot(1,nsteps, nwaves+1)
poppy.display_psf(psf, title='Defocused by {0} waves'.format(nwaves),
colorbar_orientation='horizontal')
Band Limited Coronagraph with Off-Axis Source¶
As an example of a more complicated calculation, here’s a NIRCam-style band limited coronagraph with the source not precisely centered:
oversample=2
pixelscale = 0.010 #arcsec/pixel
wavelength = 4.6e-6
osys = poppy.OpticalSystem("test", oversample=oversample)
osys.add_pupil(poppy.CircularAperture(radius=6.5/2))
osys.add_image()
osys.add_image(poppy.BandLimitedCoron(kind='circular', sigma=5.0))
osys.add_pupil()
osys.add_pupil(poppy.CircularAperture(radius=6.5/2))
osys.add_detector(pixelscale=pixelscale, fov_arcsec=3.0)
osys.source_offset_theta = 45.
osys.source_offset_r = 0.1 # arcsec
psf = osys.calc_psf(wavelength=wavelength, display_intermediates=True)
FQPM coronagraph¶
Four quadrant phase mask coronagraphs are a bit more complicated because one needs to ensure proper alignment of the FFT result with the center of the phase mask. This is done using a virtual optic called an ‘FQPM FFT aligner’ as follows:
optsys = poppy.OpticalSystem()
optsys.add_pupil( poppy.CircularAperture( radius=3, pad_factor=1.5)) #pad display area by 50%
optsys.add_pupil( poppy.FQPM_FFT_aligner()) # ensure the PSF is centered on the FQPM cross hairs
optsys.add_image() # empty image plane for "before the mask"
optsys.add_image( poppy.IdealFQPM(wavelength=2e-6))
optsys.add_pupil( poppy.FQPM_FFT_aligner(direction='backward')) # undo the alignment tilt after going back to the pupil plane
optsys.add_pupil( poppy.CircularAperture( radius=3)) # Lyot mask - change radius if desired
optsys.add_detector(pixelscale=0.01, fov_arcsec=10.0)
psf = optsys.calc_psf(wavelength=2e-6, display_intermediates=True)
FQPM on an Obscured Aperture (demonstrates compound optics)¶
As a variation, we can add a secondary obscuration. This can be done by creating a compound optic consisting of the circular outer aperture plus an opaque circular obscuration. The latter we can make using the InverseTransmission class.
primary = poppy.CircularAperture( radius=3)
secondary = poppy.InverseTransmission( poppy.CircularAperture(radius=0.5) )
aperture = poppy.CompoundAnalyticOptic( opticslist = [primary, secondary] )
optsys = poppy.OpticalSystem()
optsys.add_pupil( aperture)
optsys.add_pupil( poppy.FQPM_FFT_aligner()) # ensure the PSF is centered on the FQPM cross hairs
optsys.add_image( poppy.IdealFQPM(wavelength=2e-6))
optsys.add_pupil( poppy.FQPM_FFT_aligner(direction='backward')) # undo the alignment tilt after going back to the pupil plane
optsys.add_pupil( poppy.CircularAperture( radius=3)) # Lyot mask - change radius if desired
optsys.add_detector(pixelscale=0.01, fov_arcsec=10.0)
optsys.display()
psf = optsys.calc_psf(wavelength=2e-6, display_intermediates=True)
Semi-analytic Coronagraph Calculations¶
In some cases, coronagraphy calculations can be sped up significantly using the semi-analytic algorithm of Soummer et al. This is implemented by first creating an OpticalSystem as usual, and then casting it to a SemiAnalyticCoronagraph class (which has a special customized propagation method implementing the alternate algorithm):
The following code performs the same calculation both ways and compares their speeds:
radius = 6.5/2
lyot_radius = 6.5/2.5
pixelscale = 0.060
osys = poppy.OpticalSystem("test", oversample=8)
osys.add_pupil( poppy.CircularAperture(radius=radius), name='Entrance Pupil')
osys.add_image( poppy.CircularOcculter(radius = 0.1) )
osys.add_pupil( poppy.CircularAperture(radius=lyot_radius), name='Lyot Pupil')
osys.add_detector(pixelscale=pixelscale, fov_arcsec=5.0)
plt.figure(1)
sam_osys = poppy.SemiAnalyticCoronagraph(osys, oversample=8, occulter_box=0.15)
import time
t0s = time.time()
psf_sam = sam_osys.calc_psf(display_intermediates=True)
t1s = time.time()
plt.figure(2)
t0f = time.time()
psf_fft = osys.calc_psf(display_intermediates=True)
t1f = time.time()
plt.figure(3)
plt.clf()
plt.subplot(121)
poppy.utils.display_psf(psf_fft, title="FFT")
plt.subplot(122)
poppy.utils.display_psf(psf_sam, title="SAM")
print "Elapsed time, FFT: %.3s" % (t1f-t0f)
print "Elapsed time, SAM: %.3s" % (t1s-t0s)
On my circa-2010 Mac Pro, the results are dramatic:
Elapsed time, FFT: 62.
Elapsed time, SAM: 4.1
Shifting and rotating optics¶
All OpticalElements support arbitrary shifts and rotations
of the optic. Set the shift_x
, shift_y
or rotation
attributes.
The shifts are given in meters for pupil plane optics, or arcseconds
for image plane optics. Rotations are given in degrees counterclockwise around the optical
axis.
As an example, we can demonstrate the invariance of PSFs when an aperture is shifted:
ap_regular = poppy.CircularAperture(radius=2, pad_factor=1.5) # pad_factor is important here - without it you will
ap_shifted = poppy.CircularAperture(radius=2, pad_factor=1.5) # crop off part of the circle outside the array.
ap_shifted.shift_x =-0.75
ap_shifted.shift_y = 0.25
plt.figure(figsize=(6,6))
for optic, title, i in [(ap_regular, 'Unshifted', 1), (ap_shifted, 'Shifted', 3)]:
sys = poppy.OpticalSystem()
sys.add_pupil(optic)
sys.add_detector(0.010, fov_pixels=100)
psf = sys.calc_psf()
ax1 = plt.subplot(2,2,i)
optic.display(nrows=2, colorbar=False, ax=ax1)
ax1.set_title(title+' pupil')
ax2 = plt.subplot(2,2,i+1)
poppy.display_psf(psf,ax=ax2, colorbar=False)
ax2.set_title(title+' PSF')
In addition to setting the attributes as shown in the above example, these options can be set directly in the initialization of such elements:
ap = poppy.RectangleAperture(rotation=30, shift_x=0.1)
ap.display(colorbar=False)
Adjusting Display of Intermediate Wavefronts¶
When calculating a wavefront, you can display each intermediate wavefront plane, which often helps to visualize what’s happening in a given propagation calculation. This is done by setting display_intermediates=True
:
psf = osys.calc_psf(display_intermediates=True)
Poppy attempts to guess reasonable defaults for displaying each intermediate planes, but sometimes you may wish to override these defaults. This can be done by setting “display hint” attributes on the planes of your optical system. Available options include
wavefront_display_hint
="intensity"
or"phase"
to set what kind of display is shown for the complex wavefront at that planewavefront_display_vmax_hint
andwavefront_display_vmin_hint
to adjust the parameters of the display scalewavefront_display_imagecrop
to adjust the cropping or zoom of how much of a wavefront is displayed (by default, pupil planes are not cropped, while image planes are cropped to 5 arcseconds to better show the details of the inner core region of a PSF).display_annotate
can be set to an arbitrary function to be called in order to apply custom annotations, or any other plot adjustment outside of the scope of the above display hints.
For instance, here’s a variation of the above coronagraph calculation with some of the display parameters adjusted:
radius = 6.5/2 * u.m
lyot_radius = 6.5/2.5 *u.m
pixelscale = 0.060 *u.arcsec/u.pixel
osys = poppy.OpticalSystem(oversample=4)
pupil = poppy.CircularAperture(radius=radius)
occulter = poppy.CircularOcculter(radius = 0.1*u.arcsec)
# adjust display size and color scale after the occulter
occulter.wavefront_display_imagecrop = 1.0
occulter.wavefront_display_vmin_hint=1e-6
lyotstop = poppy.CircularAperture(radius=lyot_radius)
# hint that we would like to see intensity rather than phase after Lyot stop
lyotstop.wavefront_display_hint='intensity'
osys.add_pupil( pupil)
osys.add_image( occulter)
osys.add_pupil( lyotstop)
osys.add_detector(pixelscale=pixelscale, fov_arcsec=2.0)
# you can also set hints onto optics in the planes list
osys.planes[-1].wavefront_display_vmin_hint = 1e-6
plt.figure(figsize=(8,8))
psf = osys.calc_psf(wavelength = 1*u.micron, display_intermediates=True)